Author Index

A

  • Abbasi, Alireza Direct Oxidation of Benzene to Phenol in Liquid Phase over Nanoporous Silica of Chromium-LUS-1 [Volume 4, Issue 1, 2013]
  • Abbasi, H. Design and Manufacturing of a Micro Zinc-Air Fuel Cell for Mobile Applications [Volume 4, Issue 2, 2013]
  • Abbaszadeh, Payam The Role of Renewable Energies in Sustainable Development: Case Study Iran [Volume 4, Issue 4, 2013]
  • Abdollahzade, G. Probabilistic and Deterministic Seismic Hazard Assessment: A Case Study in Babol [Volume 4, Issue 3, 2013]
  • Abdollahzadeh, G. Analysis and Design Procedure of Corner Gusset Plate Connection in BRBFs [Volume 4, Issue 3, 2013]
  • Abdollahzadeh, Gholamreza Analytical and Experimental Studies on Behavior of Beam to Column Connections with Flange Plate under Monotonic Loading [Volume 4, Issue 3, 2013]
  • Abdollahzadeh, Gholamreza Investigation the Behavior of Beam to Column Connection with Flange Plate by Using Component Method [Volume 4, Issue 3, 2013]
  • Abouzarzadeh, Atefeh Recognition and Release of Nalidixic Acid Using Uniformly Sized -Imprinted Nanospheres: Methacrylic Acid to Methyl Methacrylate Different Mole Ratios [Volume 4, Issue 1, 2013]
  • Abu Bakar, B.H. Compressive Stress-Strain Behavior of Composite Ordinary and Reactive Powder Concrete [Volume 4, Issue 3, 2013]
  • Abu Bakar, B.H. Effect of Different Curing Conditions on the Mechanical Properties of UHPFC [Volume 4, Issue 3, 2013]
  • Afshari, Ebrahim Numerical Predictions of Oxygen Transport Enhancement in a PEM Fuel Cell with Flow Field Designs [Volume 4, Issue 4, 2013]
  • Ahmadi Pari, Masumeh Industrial Waste Management with Application of RIAM Environmental Assessment: A Case Study on Toos Industrial State, Mashhad [Volume 4, Issue 2, 2013]
  • Akbari, Hossein Seepage Analysis of Rock-Fill Dam Subjected to Water Level Fluctuation: A case study on Gotvand-Olya Dam [Volume 4, Issue 2, 2013]
  • Alamgir, Muhammed Formulation of Sub-Pollution Indices and Evaluation of Leachate Pollution Index of Pilot Scale Landfill Lysimeter [Volume 4, Issue 4, 2013]
  • Aliahmad, Mousa Ni-Doped SnO Nanoparticles S 2 ynthesized by Chemical Co-Precipitation Method [Volume 4, Issue 1, 2013]
  • Amidpour, M. Design and Manufacturing of a Micro Zinc-Air Fuel Cell for Mobile Applications [Volume 4, Issue 2, 2013]
  • Amini, Ghazaleh Compressive Evaluation of Chemical Resistance of Polymer Concrete in Corrosive Environments [Volume 4, Issue 3, 2013]
  • Amini Rad, Hasan Removal of Nutrients from Hospital Wastewater by Novel Nano-Filtration Membrane Bioreactor (NF-MBR) [Volume 4, Issue 1, 2013]
  • Ardestani, Fatemeh Production of Mycophenolic Acid by Penicillium brevicompactum in a Submerged Batch Culture: Optimization of Culture Conditions Using Taguchi Approach [Volume 4, Issue 4, 2013]
  • Asghar Ghoreyshi, Ali Equilibrium and Thermodynamic Studies of Methane Adsorption on Multi-Walled Carbon Nanotube [Volume 4, Issue 1, 2013]
  • Asghar Ghoreyshi, Ali Synthesis and Characterization of Thermally-Reduced Graphene [Volume 4, Issue 1, 2013]
  • A. Tayeh, Bassam Compressive Stress-Strain Behavior of Composite Ordinary and Reactive Powder Concrete [Volume 4, Issue 3, 2013]
  • A. Tayeh, Bassam Effect of Different Curing Conditions on the Mechanical Properties of UHPFC [Volume 4, Issue 3, 2013]
  • Azizi, Masoomeh Application of Sulfonic Acid Functionalized Nanoporous Silica (SBA-Pr-SO 3H) in the Green Strecker Reaction under Solvent Free Condition [Volume 4, Issue 1, 2013]

B

  • Badiei, Alireza Application of Sulfonic Acid Functionalized Nanoporous Silica (SBA-Pr-SO 3H) in the Green Strecker Reaction under Solvent Free Condition [Volume 4, Issue 1, 2013]
  • Badiei, Alireza Direct Oxidation of Benzene to Phenol in Liquid Phase over Nanoporous Silica of Chromium-LUS-1 [Volume 4, Issue 1, 2013]
  • Bagheri Lotfabad, Tayebe Applying Neural Network to Dynamic Modeling of Biosurfactant Production Using Soybean Oil Refinery Wastes [Volume 4, Issue 2, 2013]
  • Baharlou Houreh, Nasser Numerical Predictions of Oxygen Transport Enhancement in a PEM Fuel Cell with Flow Field Designs [Volume 4, Issue 4, 2013]
  • Bakhshi-Jooybari, Mohammad Forming Metallic Micro-Feature Bipolar Plates for Fuel Cell Using Combined Hydroforming and Stamping Processes [Volume 4, Issue 2, 2013]
  • Balali Osia, Moosa Forming Metallic Micro-Feature Bipolar Plates for Fuel Cell Using Combined Hydroforming and Stamping Processes [Volume 4, Issue 2, 2013]
  • Batebi, Yadollah Experimental Investigation of Shrinkage of Nano Hair Reinforced Concrete [Volume 4, Issue 1, 2013]
  • Beheshti, Ali Seepage Analysis of Rock-Fill Dam Subjected to Water Level Fluctuation: A case study on Gotvand-Olya Dam [Volume 4, Issue 2, 2013]
  • Behzad, Tayebeh Factors Affecting the Performance of Single Chamber Microbial Fuel Cell Using a Novel Configuration [Volume 4, Issue 4, 2013]
  • Beygi, M.A. Effect of Agro-Waste Ash on Mechanical Properties of Epoxy Polymer Concrete [Volume 4, Issue 3, 2013]
  • Beygi, Morteza Compressive Evaluation of Chemical Resistance of Polymer Concrete in Corrosive Environments [Volume 4, Issue 3, 2013]
  • Bin Hassan, Adzhar Effect of Triangular Web Profile on the Shear Behaviour of Steel I-Beam [Volume 4, Issue 3, 2013]

D

  • Davarnejad, Reza Investigation of Some Effective Parameters on the Fluidized Bed Grain Dryers [Volume 4, Issue 4, 2013]
  • Daviran, Samaneh Dynamic Modeling of a Hybrid Photovoltaic System with Hydrogen/Air PEM Fuel Cell [Volume 4, Issue 2, 2013]
  • Dehbashi, Mohsen Ni-Doped SnO Nanoparticles S 2 ynthesized by Chemical Co-Precipitation Method [Volume 4, Issue 1, 2013]
  • Dehghani Kiadehi, Asieh Investigation of the Solution Electrical Conductivity Effect upon the Synthesis of Carbon Nanotubes by Arc Discharge Method [Volume 4, Issue 1, 2013]
  • De’nan, Fatimah Effect of Triangular Web Profile on the Shear Behaviour of Steel I-Beam [Volume 4, Issue 3, 2013]
  • Duju, Alik Domination of Grain Bearing on the Strength Properties of Engkabang Jantong as Fast Growing Timber in Sarawak [Volume 4, Issue 3, 2013]

E

  • Ekoh, G.O. Performance of Activated Carbon from Cassava Peels for the Treatment of Effluent Wastewate [Volume 4, Issue 4, 2013]
  • Eliassi, Ali Optimization of Hydrogen Production by Ethanol Steam Reforming Using Maximization of H2/CO Ratio with Taguchi Experimental Design Method [Volume 4, Issue 2, 2013]
  • Enhessari, Morteza Fabrication and Characterization of Poly Vinyl Alcohol/ Poly Vinyl Pyrrolidone/MnTiO Nanocomposite Membranes for PEM Fuel Cells [Volume 4, Issue 2, 2013]

F

  • Faramarzi, Shamsolzaman Gold and Silver Nanowires Impact on the Degree of Polarization of Light [Volume 4, Issue 1, 2013]
  • Farhadi, M. Mix Convection Heat Transfer in a Lid Driven Enclosure Filled by Nanofluid [Volume 4, Issue 4, 2013]
  • Fateri, Sara Experimental Investigation of Shrinkage of Nano Hair Reinforced Concrete [Volume 4, Issue 1, 2013]
  • Fooladv, Reza Modeling and Experimental Studies on Pre-Loaded Reinforced Concrete Beams Strengthened by External Reinforcement [Volume 4, Issue 3, 2013]
  • Forouzani, Mehdi Recognition and Release of Nalidixic Acid Using Uniformly Sized -Imprinted Nanospheres: Methacrylic Acid to Methyl Methacrylate Different Mole Ratios [Volume 4, Issue 1, 2013]

G

  • G. Gaikar, Vilas Development of Microbial Fuel Cell Using Distillery Spent Wash: Evaluation of Current Generation and COD Removal with Respect to pH [Volume 4, Issue 4, 2013]
  • Ghadimi, Feridon Statistical Analysis of Heavy Metal Contamination in Urban Dusts of Arak, Iran [Volume 4, Issue 4, 2013]
  • Ghassemi, Hassan Design of the Point Absorber Wave Energy Converter for Assaluyeh Port [Volume 4, Issue 2, 2013]
  • Gheibi, Sepideh Numerical Simulation of Electrochemical Processes in Polymeric Membrane Fuel Cells [Volume 4, Issue 2, 2013]
  • Ghiasi, Mahmoud Design of the Point Absorber Wave Energy Converter for Assaluyeh Port [Volume 4, Issue 2, 2013]
  • Gholami, Javad Direct Oxidation of Benzene to Phenol in Liquid Phase over Nanoporous Silica of Chromium-LUS-1 [Volume 4, Issue 1, 2013]
  • Gho-lamzadeh, Parisa Application of Sulfonic Acid Functionalized Nanoporous Silica (SBA-Pr-SO 3H) in the Green Strecker Reaction under Solvent Free Condition [Volume 4, Issue 1, 2013]
  • Ghomi, Mohammad Statistical Analysis of Heavy Metal Contamination in Urban Dusts of Arak, Iran [Volume 4, Issue 4, 2013]
  • Ghorbani, R. Design and Manufacturing of a Micro Zinc-Air Fuel Cell for Mobile Applications [Volume 4, Issue 2, 2013]
  • Golbabaei Kootenaei, Farshad Removal of Nutrients from Hospital Wastewater by Novel Nano-Filtration Membrane Bioreactor (NF-MBR) [Volume 4, Issue 1, 2013]
  • Golestaneh, Mehdi Compressive Evaluation of Chemical Resistance of Polymer Concrete in Corrosive Environments [Volume 4, Issue 3, 2013]
  • Golkhou, Fatemeh CFD Simulation of Nanosufur Crystallization Incorporating Population Balance Modeling [Volume 4, Issue 1, 2013]
  • Gorgi, Abdolhamid Forming Metallic Micro-Feature Bipolar Plates for Fuel Cell Using Combined Hydroforming and Stamping Processes [Volume 4, Issue 2, 2013]

H

  • Haiter Lenin, A. Performance Characteristics of a Diesel Engine Using Mahua Biodiesel as Alternative Fuel [Volume 4, Issue 2, 2013]
  • Hajati, Abdolmotaleb Statistical Analysis of Heavy Metal Contamination in Urban Dusts of Arak, Iran [Volume 4, Issue 4, 2013]
  • Hassanzadeh Afrouzi, H. Mix Convection Heat Transfer in a Lid Driven Enclosure Filled by Nanofluid [Volume 4, Issue 4, 2013]
  • Hisham Abu Bakar, Badorul Domination of Grain Bearing on the Strength Properties of Engkabang Jantong as Fast Growing Timber in Sarawak [Volume 4, Issue 3, 2013]
  • Hooi Min, Yee Form-Finding of Tensioned Fabric Structure in the Shape of Möbius Strip [Volume 4, Issue 3, 2013]
  • Hooshyari, Khadijeh Fabrication and Characterization of Poly Vinyl Alcohol/ Poly Vinyl Pyrrolidone/MnTiO Nanocomposite Membranes for PEM Fuel Cells [Volume 4, Issue 2, 2013]
  • Hoseinzadeh, M. Effect of Agro-Waste Ash on Mechanical Properties of Epoxy Polymer Concrete [Volume 4, Issue 3, 2013]
  • Hoveidi, Hassan Industrial Waste Management with Application of RIAM Environmental Assessment: A Case Study on Toos Industrial State, Mashhad [Volume 4, Issue 2, 2013]

I

  • Ilaboya, I.R. Performance of Activated Carbon from Cassava Peels for the Treatment of Effluent Wastewate [Volume 4, Issue 4, 2013]
  • Ismaili, Gaddafi Domination of Grain Bearing on the Strength Properties of Engkabang Jantong as Fast Growing Timber in Sarawak [Volume 4, Issue 3, 2013]

J

  • Jabari seresht, Razieh Synthesis and Characterization of Thermally-Reduced Graphene [Volume 4, Issue 1, 2013]
  • Jahanshahi, Mohsen Equilibrium and Thermodynamic Studies of Methane Adsorption on Multi-Walled Carbon Nanotube [Volume 4, Issue 1, 2013]
  • Jahanshahi, Mohsen Recognition and Release of Nalidixic Acid Using Uniformly Sized -Imprinted Nanospheres: Methacrylic Acid to Methyl Methacrylate Different Mole Ratios [Volume 4, Issue 1, 2013]
  • Jahanshahi, Mohsen Investigation of the Solution Electrical Conductivity Effect upon the Synthesis of Carbon Nanotubes by Arc Discharge Method [Volume 4, Issue 1, 2013]
  • Jahanshahi, Mohsen Synthesis and Characterization of Thermally-Reduced Graphene [Volume 4, Issue 1, 2013]
  • Jamal Hosseinipour, Seyed Forming Metallic Micro-Feature Bipolar Plates for Fuel Cell Using Combined Hydroforming and Stamping Processes [Volume 4, Issue 2, 2013]
  • Janalizade, A. Probabilistic and Deterministic Seismic Hazard Assessment: A Case Study in Babol [Volume 4, Issue 3, 2013]
  • Javanbakht, Mehran Fabrication and Characterization of Poly Vinyl Alcohol/ Poly Vinyl Pyrrolidone/MnTiO Nanocomposite Membranes for PEM Fuel Cells [Volume 4, Issue 2, 2013]
  • Javidan, Fatemeh Shape Optimization of Hollow Concrete Blocks Using the Lattice Discrete Particle Model [Volume 4, Issue 3, 2013]
  • Jodeiri, Farzad Experimental Investigation on Steel Bracing Connection Through Hinge Plate [Volume 4, Issue 3, 2013]

K

  • Kalani Sarokolayi, L. Seismic Analysis of Elevated Water Storage Tanks Subjected to Six Correlated Ground Motion Components [Volume 4, Issue 3, 2013]
  • Kamal Chaharsooghi, S. The Role of Renewable Energies in Sustainable Development: Case Study Iran [Volume 4, Issue 4, 2013]
  • Kamanbedast, Amirabbas Seepage Analysis of Rock-Fill Dam Subjected to Water Level Fluctuation: A case study on Gotvand-Olya Dam [Volume 4, Issue 2, 2013]
  • K. Askar, Lawend Effect of Different Curing Conditions on the Mechanical Properties of UHPFC [Volume 4, Issue 3, 2013]
  • Keshavarz Moraveji, Mostafa Investigation of Some Effective Parameters on the Fluidized Bed Grain Dryers [Volume 4, Issue 4, 2013]
  • Khalim, A.R. Experimental Investigation on Steel Bracing Connection Through Hinge Plate [Volume 4, Issue 3, 2013]
  • Khuzaimah Abdul Rahim, Khairul Domination of Grain Bearing on the Strength Properties of Engkabang Jantong as Fast Growing Timber in Sarawak [Volume 4, Issue 3, 2013]
  • Kok Keong, Choong Effect of Perforation Area and Arrangement Pattern on Structural Behaviour of Nature Inspired Perforated Hollow Structure [Volume 4, Issue 3, 2013]
  • Kok Keong, Choong Form-Finding of Tensioned Fabric Structure in the Shape of Möbius Strip [Volume 4, Issue 3, 2013]
  • Koulaeian, Tahereh Industrial Waste Management with Application of RIAM Environmental Assessment: A Case Study on Toos Industrial State, Mashhad [Volume 4, Issue 2, 2013]

M

  • Madhavi, Gajulapalle Synthesis and Spectral Characterization of Iron Based Micro and Nanoparticles [Volume 4, Issue 4, 2013]
  • Madhavi, Vemula Synthesis and Spectral Characterization of Iron Based Micro and Nanoparticles [Volume 4, Issue 4, 2013]
  • Mahdi Mardanpour, Mohammad Factors Affecting the Performance of Single Chamber Microbial Fuel Cell Using a Novel Configuration [Volume 4, Issue 4, 2013]
  • Manan, Muhammad Aqueous Foams Stabilized by Hydrophilic Silica Nanoparticles via In-Situ Physisorption of Nonionic TX100 Surfactant [Volume 4, Issue 1, 2013]
  • Mansouri, Babak Earthquake Damage Detection in Built Environment: An Object-Oriented Approach Using Radar Imagery [Volume 4, Issue 3, 2013]
  • Manteghian, Mehrdad Direct Oxidation of Benzene to Phenol in Liquid Phase over Nanoporous Silica of Chromium-LUS-1 [Volume 4, Issue 1, 2013]
  • Masoud Parvanian, Amir Development of Open Pore Copper Foams to Use as Bipolar Plates in Polymer Electrolyte Membrane Fuel Cell Stacks [Volume 4, Issue 2, 2013]
  • Megat Johari, M.A. Compressive Stress-Strain Behavior of Composite Ordinary and Reactive Powder Concrete [Volume 4, Issue 3, 2013]
  • Mehrpooya, Mehdi Dynamic Modeling of a Hybrid Photovoltaic System with Hydrogen/Air PEM Fuel Cell [Volume 4, Issue 2, 2013]
  • Mirmohammadi, Seyedtaghi Indoor Air Quality Assessment with Emphasis on Flour Dust: A Cross- Sectional Study of a Random Sample from Iranian Bakeries Workers [Volume 4, Issue 2, 2013]
  • Mirzagoltabar, Alireza Experimental Investigation of Shrinkage of Nano Hair Reinforced Concrete [Volume 4, Issue 1, 2013]
  • Modarress, Hamid Optimization of Hydrogen Production by Ethanol Steam Reforming Using Maximization of H2/CO Ratio with Taguchi Experimental Design Method [Volume 4, Issue 2, 2013]
  • Mohammad Attaran, Abdol Fabrication and Characterization of Poly Vinyl Alcohol/ Poly Vinyl Pyrrolidone/MnTiO Nanocomposite Membranes for PEM Fuel Cells [Volume 4, Issue 2, 2013]
  • Mohammad Ebrahimzadeh Sepasgozar, Saleh Seismic Behavior Assessment of RBS andAW-RBS Moment Resistant Connections with Double I-Beam [Volume 4, Issue 3, 2013]
  • Mohammadi-Doostdar, Hossein Modeling and Experimental Studies on Pre-Loaded Reinforced Concrete Beams Strengthened by External Reinforcement [Volume 4, Issue 3, 2013]
  • Mohammadi Ziarani, Ghodsi Direct Oxidation of Benzene to Phenol in Liquid Phase over Nanoporous Silica of Chromium-LUS-1 [Volume 4, Issue 1, 2013]
  • Mohhamadi Ziarani, Ghodsi Application of Sulfonic Acid Functionalized Nanoporous Silica (SBA-Pr-SO 3H) in the Green Strecker Reaction under Solvent Free Condition [Volume 4, Issue 1, 2013]
  • Monemtabary, Sanaz. Equilibrium and Thermodynamic Studies of Methane Adsorption on Multi-Walled Carbon Nanotube [Volume 4, Issue 1, 2013]
  • Morad Rashidi, Ali Synthesis and Characterization of Thermally-Reduced Graphene [Volume 4, Issue 1, 2013]
  • Mostafa Shabanian, Seyed Experimental Investigation of Shrinkage of Nano Hair Reinforced Concrete [Volume 4, Issue 1, 2013]
  • Mostafa Shabanian, Seyed Analytical and Experimental Studies on Behavior of Beam to Column Connections with Flange Plate under Monotonic Loading [Volume 4, Issue 3, 2013]
  • Mostafa Shabanian, Seyed Investigation the Behavior of Beam to Column Connection with Flange Plate by Using Component Method [Volume 4, Issue 3, 2013]
  • Mozdianfard, Mohammadreza Investigation of the Solution Electrical Conductivity Effect upon the Synthesis of Carbon Nanotubes by Arc Discharge Method [Volume 4, Issue 1, 2013]
  • M. Rafizul, Islam Formulation of Sub-Pollution Indices and Evaluation of Leachate Pollution Index of Pilot Scale Landfill Lysimeter [Volume 4, Issue 4, 2013]

N

  • Naderi, Fatemeh Factors Affecting the Performance of Single Chamber Microbial Fuel Cell Using a Novel Configuration [Volume 4, Issue 4, 2013]
  • Naeej, Mojtaba Seismic Retrofitting of Steel Frames with Buckling Restrained Braces [Volume 4, Issue 3, 2013]
  • Naghipour, M. Analysis and Design Procedure of Corner Gusset Plate Connection in BRBFs [Volume 4, Issue 3, 2013]
  • Naghipour, Morteza Seismic Behavior Assessment of RBS andAW-RBS Moment Resistant Connections with Double I-Beam [Volume 4, Issue 3, 2013]
  • Naghipour, Morteza Modeling and Experimental Studies on Pre-Loaded Reinforced Concrete Beams Strengthened by External Reinforcement [Volume 4, Issue 3, 2013]
  • Najafpour, G.D. Effect of Agro-Waste Ash on Mechanical Properties of Epoxy Polymer Concrete [Volume 4, Issue 3, 2013]
  • Najafpour, Ghasem Compressive Evaluation of Chemical Resistance of Polymer Concrete in Corrosive Environments [Volume 4, Issue 3, 2013]
  • Nasr Esfahany, Mohsen Factors Affecting the Performance of Single Chamber Microbial Fuel Cell Using a Novel Configuration [Volume 4, Issue 4, 2013]
  • Nateghi-A, F. Studying the Effect of Initial Damage on Failure Probability of One Story Steel Buildings [Volume 4, Issue 3, 2013]
  • Navayi Neya, B. Seismic Analysis of Elevated Water Storage Tanks Subjected to Six Correlated Ground Motion Components [Volume 4, Issue 3, 2013]
  • Nazari, Mehdi Design of the Point Absorber Wave Energy Converter for Assaluyeh Port [Volume 4, Issue 2, 2013]
  • Neelamegam, P. Performance of Evacuated Tube Collector Solar Dryer with and Without Heat Sources [Volume 4, Issue 4, 2013]
  • Nejadseyfi, Omid A Numerical Study of the Influence of Gas Diffusion Layer Porosity on Cell Performance of Counter Flow Proton Exchange Membrane Fuel Cells [Volume 4, Issue 2, 2013]
  • Nemati, Marzieh Modeling and Experimental Studies on Pre-Loaded Reinforced Concrete Beams Strengthened by External Reinforcement [Volume 4, Issue 3, 2013]

O

  • Omar, Norbaya Effect of Triangular Web Profile on the Shear Behaviour of Steel I-Beam [Volume 4, Issue 3, 2013]
  • Openg, a Domination of Grain Bearing on the Strength Properties of Engkabang Jantong as Fast Growing Timber in Sarawak [Volume 4, Issue 3, 2013]
  • O-Thong, Sompong Biohydrogen Production from Palm Oil Mill Effluent Pretreated [Volume 4, Issue 4, 2013]
  • Oti, E.O. Performance of Activated Carbon from Cassava Peels for the Treatment of Effluent Wastewate [Volume 4, Issue 4, 2013]

P

  • Panjepour, Masoud Development of Open Pore Copper Foams to Use as Bipolar Plates in Polymer Electrolyte Membrane Fuel Cell Stacks [Volume 4, Issue 2, 2013]
  • Parsaeifard, N. Studying the Effect of Initial Damage on Failure Probability of One Story Steel Buildings [Volume 4, Issue 3, 2013]
  • Pazoki, Maryam Industrial Waste Management with Application of RIAM Environmental Assessment: A Case Study on Toos Industrial State, Mashhad [Volume 4, Issue 2, 2013]
  • P. Labrath, Yogita Development of Microbial Fuel Cell Using Distillery Spent Wash: Evaluation of Current Generation and COD Removal with Respect to pH [Volume 4, Issue 4, 2013]
  • Prasad, T.N.V.K.V. Synthesis and Spectral Characterization of Iron Based Micro and Nanoparticles [Volume 4, Issue 4, 2013]
  • Prasertsan, Poonsuk Biohydrogen Production from Palm Oil Mill Effluent Pretreated [Volume 4, Issue 4, 2013]

R

  • Ranjbar, Mohsen Statistical Analysis of Heavy Metal Contamination in Urban Dusts of Arak, Iran [Volume 4, Issue 4, 2013]
  • Ravi, R. Performance Characteristics of a Diesel Engine Using Mahua Biodiesel as Alternative Fuel [Volume 4, Issue 2, 2013]
  • Rezaei, Mohsen The Role of Renewable Energies in Sustainable Development: Case Study Iran [Volume 4, Issue 4, 2013]
  • Reza Karimzadeh, Ali Optimization of Hydrogen Production by Ethanol Steam Reforming Using Maximization of H2/CO Ratio with Taguchi Experimental Design Method [Volume 4, Issue 2, 2013]
  • Reza Naeej, Mohammad Seismic Retrofitting of Steel Frames with Buckling Restrained Braces [Volume 4, Issue 3, 2013]
  • R. Nimje, Vanita Development of Microbial Fuel Cell Using Distillery Spent Wash: Evaluation of Current Generation and COD Removal with Respect to pH [Volume 4, Issue 4, 2013]
  • Roostaazad, Reza Applying Neural Network to Dynamic Modeling of Biosurfactant Production Using Soybean Oil Refinery Wastes [Volume 4, Issue 2, 2013]
  • R. Tavakoli, H. Seismic Analysis of Elevated Water Storage Tanks Subjected to Six Correlated Ground Motion Components [Volume 4, Issue 3, 2013]

S

  • Sadeghi, Morteza Construction of Composite Polymer Bipolar Plate for Pem Fuel Cell [Volume 4, Issue 4, 2013]
  • Safarnejad, Mohammad Shape Optimization of Hollow Concrete Blocks Using the Lattice Discrete Particle Model [Volume 4, Issue 3, 2013]
  • Salehi, S. Design and Manufacturing of a Micro Zinc-Air Fuel Cell for Mobile Applications [Volume 4, Issue 2, 2013]
  • Salmani, Hosein Gold and Silver Nanowires Impact on the Degree of Polarization of Light [Volume 4, Issue 1, 2013]
  • Sayehbani, Mesbah Design of the Point Absorber Wave Energy Converter for Assaluyeh Port [Volume 4, Issue 2, 2013]
  • Sedaqatv, Ramin Factors Affecting the Performance of Single Chamber Microbial Fuel Cell Using a Novel Configuration [Volume 4, Issue 4, 2013]
  • Seengenyoung, Jiravut Biohydrogen Production from Palm Oil Mill Effluent Pretreated [Volume 4, Issue 4, 2013]
  • Seyedakbari, Leila Application of Sulfonic Acid Functionalized Nanoporous Silica (SBA-Pr-SO 3H) in the Green Strecker Reaction under Solvent Free Condition [Volume 4, Issue 1, 2013]
  • Shahbeyk, Sharif Shape Optimization of Hollow Concrete Blocks Using the Lattice Discrete Particle Model [Volume 4, Issue 3, 2013]
  • Shariati Niasar, Mojtaba Equilibrium and Thermodynamic Studies of Methane Adsorption on Multi-Walled Carbon Nanotube [Volume 4, Issue 1, 2013]
  • Sharifi, Forough Factors Affecting the Performance of Single Chamber Microbial Fuel Cell Using a Novel Configuration [Volume 4, Issue 4, 2013]
  • Shokri, M. Analysis and Design Procedure of Corner Gusset Plate Connection in BRBFs [Volume 4, Issue 3, 2013]
  • Shokuhfar, Ali A Numerical Study of the Influence of Gas Diffusion Layer Porosity on Cell Performance of Counter Flow Proton Exchange Membrane Fuel Cells [Volume 4, Issue 2, 2013]
  • Subramanian, C.V. Performance of Evacuated Tube Collector Solar Dryer with and Without Heat Sources [Volume 4, Issue 4, 2013]

T

  • Tajee Hamed Mosavian, Mahmod CFD Simulation of Nanosufur Crystallization Incorporating Population Balance Modeling [Volume 4, Issue 1, 2013]
  • Talebzadeh Amiri, M. Probabilistic and Deterministic Seismic Hazard Assessment: A Case Study in Babol [Volume 4, Issue 3, 2013]
  • Tavakoli, H.R. Probabilistic and Deterministic Seismic Hazard Assessment: A Case Study in Babol [Volume 4, Issue 3, 2013]
  • Tayeh, S.M. Compressive Stress-Strain Behavior of Composite Ordinary and Reactive Powder Concrete [Volume 4, Issue 3, 2013]
  • Tayyebi, Shokoufe Applying Neural Network to Dynamic Modeling of Biosurfactant Production Using Soybean Oil Refinery Wastes [Volume 4, Issue 2, 2013]
  • Thyagarajan, K. Performance Characteristics of a Diesel Engine Using Mahua Biodiesel as Alternative Fuel [Volume 4, Issue 2, 2013]
  • Torabi, F. Design and Manufacturing of a Micro Zinc-Air Fuel Cell for Mobile Applications [Volume 4, Issue 2, 2013]
  • Torabi, Farschad Numerical Simulation of Electrochemical Processes in Polymeric Membrane Fuel Cells [Volume 4, Issue 2, 2013]

U

  • Umayal Sundari, A.R. Performance of Evacuated Tube Collector Solar Dryer with and Without Heat Sources [Volume 4, Issue 4, 2013]
  • Umukoro, L.O. Performance of Activated Carbon from Cassava Peels for the Treatment of Effluent Wastewate [Volume 4, Issue 4, 2013]

V

  • Vakili-Nezhaad, Gholamreza Investigation of the Solution Electrical Conductivity Effect upon the Synthesis of Carbon Nanotubes by Arc Discharge Method [Volume 4, Issue 1, 2013]
  • Vaseghi Amiri, J. Seismic Analysis of Elevated Water Storage Tanks Subjected to Six Correlated Ground Motion Components [Volume 4, Issue 3, 2013]
  • Vaseghi Amiri, Javad Seismic Retrofitting of Steel Frames with Buckling Restrained Braces [Volume 4, Issue 3, 2013]

Y

  • Yian Peen, Woo Effect of Perforation Area and Arrangement Pattern on Structural Behaviour of Nature Inspired Perforated Hollow Structure [Volume 4, Issue 3, 2013]
  • Yie Sue, Chua Effect of Perforation Area and Arrangement Pattern on Structural Behaviour of Nature Inspired Perforated Hollow Structure [Volume 4, Issue 3, 2013]
  • Yousefi, Zabihollah Elimination of Nematode Cysts and Ova from Hospital Sewage by Activated Sludge Process [Volume 4, Issue 4, 2013]
  • Yusuf, Suriatie Aqueous Foams Stabilized by Hydrophilic Silica Nanoparticles via In-Situ Physisorption of Nonionic TX100 Surfactant [Volume 4, Issue 1, 2013]

Z

  • Zaidi Jaafar, Mohd Aqueous Foams Stabilized by Hydrophilic Silica Nanoparticles via In-Situ Physisorption of Nonionic TX100 Surfactant [Volume 4, Issue 1, 2013]
  • Zarmehri, Ehsan Construction of Composite Polymer Bipolar Plate for Pem Fuel Cell [Volume 4, Issue 4, 2013]
  • Ziaei hezarjaribi, Hajar Elimination of Nematode Cysts and Ova from Hospital Sewage by Activated Sludge Process [Volume 4, Issue 4, 2013]
  • Zolriasatein, Ashkan A Numerical Study of the Influence of Gas Diffusion Layer Porosity on Cell Performance of Counter Flow Proton Exchange Membrane Fuel Cells [Volume 4, Issue 2, 2013]