Energy
A. Habibzadeh; M. Abbasalizadeh; I. Mirzaee; S. Jafarmadar; H. Shirvani
Abstract
In this study, renewable energy sources including a high-temperature solar parabolic trough collector and geothermal water integrated with a modified Kalina cycle, a combined ORC-EJR cycle, an electrolyzer, an RO desalination unit, and a domestic water heater. SiO2 and TiO2 nanoparticles dissolved in ...
Read More
In this study, renewable energy sources including a high-temperature solar parabolic trough collector and geothermal water integrated with a modified Kalina cycle, a combined ORC-EJR cycle, an electrolyzer, an RO desalination unit, and a domestic water heater. SiO2 and TiO2 nanoparticles dissolved in Therminol VP1 are applied as the working fluid of the solar collector. A comparative analysis of introduced working fluids is performed from energy, exergy as well as cost analysis point of view to evaluate their efficiencies. Solar irradiation, ambient temperature, and collector inlet temperature were the parameters investigated to discover their effects on energy and exergy efficiency, solar collector outlet temperature, hydrogen production rate, and freshwater production rate. The highest generated outlet temperature of the solar collector outlet was 693.8 K obtained by Therminol VP1/SiO2 nanofluid. The maximum energy and exergy efficiencies of the proposed system were 36.69 % and 17.76 %, respectively. Moreover, it is found that by increasing the solar collector inlet temperature, the hydrogen production rate decreases while the water production rate increases.
Renewable Energy
B. Khorram; I. Mirzaee; S. Jafarmadar
Abstract
The main purpose of this study is to evaluate the thermodynamic and economic performance of using a solar chimney and wind turbine to help generate electricity in a multigeneration system. The proposed system is designed to generate power, heating, cooling, hot water, and steam. Parametric studies were ...
Read More
The main purpose of this study is to evaluate the thermodynamic and economic performance of using a solar chimney and wind turbine to help generate electricity in a multigeneration system. The proposed system is designed to generate power, heating, cooling, hot water, and steam. Parametric studies were conducted to evaluate the effects of various parameters such as Brayton cycle turbine inlet pressure, organic Rankine cycle turbine inlet temperature, solar radiation, wind speed, and absorption refrigeration cycle evaporator temperature on the system efficiency. The effects of these parameters on the energy, exergy, and economic efficiencies of the whole system were investigated. The results showed that the highest energy efficiency and total exergy of the multigeneration system were 22.12% and 11.4%, respectively. Also, the total power generation capacity of the studied system was calculated to be 2103 kW. The results also depicted that the highest rate of exergy destruction for the main components of the system is found in the parabolic dish solar collector. Increasing the turbine inlet pressure, the average wind velocity of the wind turbine and, evaporator temperature increasing of absorption refrigeration cycle has a positive effect on the efficiency of the proposed system.
