Energy
N. Amani; A. Sabamehr
Abstract
The purpose of this research is to analyze the energy of a residential building in the city of Tabriz with a cold and dry climate using energy simulation to provide a model to minimize energy consumption. A comparative model of energy consumption analysis in a three-story building unit with dimensions ...
Read More
The purpose of this research is to analyze the energy of a residential building in the city of Tabriz with a cold and dry climate using energy simulation to provide a model to minimize energy consumption. A comparative model of energy consumption analysis in a three-story building unit with dimensions of 181 square meters is presented using 5 layout modes in the wall, floor, ceiling, window and door. The number of 5 designs with different arrangement of rooms and different number of windows were compared in terms of energy conservation in 51 different diagrams and the optimal energy saving design is selected. In the next step, according to the obtained results, the design of the building in the desired site is discussed. At the end, in order to check the amount of energy absorbed in the building, energy diagrams will be obtained for the thermal region of the coldest day of the year. The results show that the most optimal energy consumption of the residential building is related to the design of plan B with the fabric gains value of 41767 Wh. After that, the designed plan A show the most optimal energy consumption in the building with fabric gains value of 41028 Wh in the month of July. The results of this research are useful for energy efficiency of residential buildings and environmental management in future.
S. N. Nnamchi; O. A. Nnamchi; E. O. Sangotayo; S. A. Ismael; O. K. Nkurunziza; V. Gabriel
Abstract
The design of a flat-plate solar collector (FPSC) is accomplished by multiple input multiple output (MIMO) design technique. The design variables (absorber, fluid and glass temperatures; length, width, height of the FPSC) were the unknown variables in the commensurate thermal balance equations based ...
Read More
The design of a flat-plate solar collector (FPSC) is accomplished by multiple input multiple output (MIMO) design technique. The design variables (absorber, fluid and glass temperatures; length, width, height of the FPSC) were the unknown variables in the commensurate thermal balance equations based on; component, overall and yardstick thermal balance on the FPSC. Then, simulator matrices were setup comprising of coefficient and column matrices of design functions. The elements of the coefficient matrix were the partial derivatives of the design functions with respect to the design variables. Besides the convective and radiative heat transfer coefficients were function of the design variables. The initial values of the design variables (307K, 334.5K, 368K, 2 m, 1 m, and 0.045m, respectively) were set, at the seventh iteration, the output variables (306.9K, 339.15K, 368.1K, 2.01m, 1.005m, 0.04m, respectively) merged as the design functions ® 0 with insignificant change in the design variables. The output results were used to simulate FPSC, to track its responses to changes in the physical conditions, the stimulation revealed some constraints in the design of the FPSC, which is vital information for the overall optimization of the FPSC. The design yardsticks; the thermal efficiency (0.76) and the effectiveness (0.4) are quite pragmatic. This shows that MIMO technique to thermal system design is effective as convergence among the design variables was sought. Moreover, MIMO considered all thermal losses instead of basing the yardsticks on top loss overall transfer coefficient alone; thus, neglecting sidewalls and base losses. Moreover, the advent of connecting box prepares the preheating unit for high temperature drying (> 150 oC) on integration with a reheating unit.
